Sheet metal cutting machine with a bridge- or flying arm type motion coordinate system. The coordinate system sizes start from 1 x 2 meters and increase to 3 x 12 meters. The sheet metal cutting machine can have two bridges and each bridge can have two cutting heads. The sheet metal cutting machine can be 3- or 5-axis.

Control

Windows-based user interface.

• Graphical simulation
• Reads and automatically creates the path from DXF images
• Reads G-code as well
• Can process forward and backward
• “Even pace”, even feed rate control function
• Partial and smooth processing method
• Automatic speed processing function for small radii and sharp corners
• Circle processing function
• Coordinate saving function after power interruption
• Dual speed increase/decrease data function
• Pause, continue and process from any operation
• Delay time can be set freely
• Manual operation, automatic operation, editing, undo
• 5-axis control

Pump

Standard pump pressure is 410 Mpa.

• Oil pump flow rate 90 l/min
• Maximum water flow rate 3.8 l/min
• Maximum orifice diameter 0,36 mm
• Maximum pressure 410 MPa
• Continuous working pressure 360 ~380 Mpa
• Main motor power 37 kW 50 Hp
• Power supply 380V 3-phase 50 Hz
• Maximum oil pressure 20 Mpa

In addition, the standard equipment includes a cutting head and an abrasive feeding system, which feeds sand into the cutting water. Renzi has supplied flying arm type 1 x 2 m machines for prototyping and product development as well as 2 x 3 m bridge models for continuous production. The sheet metal cutting machine is the most cost-effective when cutting materials that cannot be cut using other methods. The buyer should consider the need for electricity and the large fuse required by the large pump, as not all industrial halls have sufficiently large fuses. If water from a well is used, it should first be tested for iron content. Also, the pump system must have sufficient volume and pressure to ensure that the feed water reaches the sheet metal cutting machine’s pump sufficiently.